Performance Hardware
User’s Guide
C o r s a i r A i r f l o w P R O
Q u i c k I n s t a l l G u i d e
A pictorial step-by-step of how to install your new Airflow PRO memory activity
and temperature monitor device.
Version 1.0
March, 2010
Corsair Airflow PRO Quick Start Guide
The Airflow Pro display device has six separate data leads for the
activity LEDs. Turn the module over and locate the appropriate con-
nectors for the number of memory modules you have. (Don’t worry,
even if you only have two modules, all six LED banks will still light up
with peak or average memory activity)
3
Airflow Pro Data Con-
nectors (Photo shows
3 cables connected
out of possible 6)
Airflow Pro Power
Connector (cable not
connected)
Corsair Airflow PRO Quick Start Guide
Connect the power cable.
4
5
Turn your Airflow Pro device over and attach it to the Airflow fan by usin
the two screws from step 1.
Corsair Airflow PRO Quick Start Guide
When attached correctly, the top part of the Airflow Pro sits on the Airflow
fan and the bottom is fastened using the thumbscrews that were removed
during step 1.
6
Connect the data cables to the DHX Pro connectors on your Dominator
Memory.
7
Corsair Airflow PRO Quick Start Guide
Connect the power cable to an available 4-pin molex adapter from your
power supply.
8
Power on your system and enjoy the show!
9
Corsair Airflow PRO Quick Start Guide
Resources
Corsair Airflow PRO Product Page:
© June,, 2010, Corsair Memory, Incorporated. All rights reserved. All trademarks and registered
trademarks are the property of their respective owners in the United States and/or other countries.
|
Hobart HGC5 User Manual
Hitachi DV W1U User Manual
Fujitsu Computer Monitor L19 2 User Manual
Cypress CY14B256K User Manual
Cypress CY7C1381DV25 User Manual
Compaq MV 5500 User Manual
Cisco Systems Cisco Unified IP Conference Station 7937G User Manual
Char Broil 466224611 User Manual
Black Box CRT Direct View TV User Manual
Asus M2R FVM User Manual